About the journal

The official Journal of Rural Tourism (JoRT) published by Borneo Novelty Publishing in collaboration with Department of Business Balikpapan State Polytechnic.

Aims & scope

Welcome to official Journal of Rural Tourism (abreviation JoRT), an international peer-reviewed journal that explicitly focuses on the interface rural tourism, sustainable development, local gastronomy, and community empowerment. We seek articles with clear evidence of this interaction, and articles that are not related to rural tourism will not be considered. This journal equally encourages scientists and professionals to publish original scientific papers, review articles, and short communication. 

JoRT welcomes articles that engage with a wide range of interdisciplinary approaches and critical perspectives on rural tourism, including (but not limited to) the following themes:

• Social and Economic Impacts: Analysis of the effects of tourism on local community well-being, job creation, and changes in rural socio-economic structures.
• Sustainability in Rural Tourism: Studies on natural resource management, environmental conservation, and the development of sustainable tourism practices in rural areas.
• Innovation in Tourism Products and Services: Research on the development of diverse tourism offerings, including nature-based, cultural, agritourism, local gastronomy and ecotourism experiences.
• Empowerment of Local Communities: Exploration of how tourism can empower local communities, encourage active participation, and strengthen cultural identities.
• Policies and Management of Rural Tourism: Discussions on public policies, regulations, and managerial practices that support or hinder tourism development in rural areas.
• Tourist Experience and Perceptions of Rural Destinations: Research on the motivations, behaviors, and perceptions of tourists toward rural destinations and their impact on travel decisions.
• Transformation and Changes in Rural Tourism: Analysis of trends and dynamics in rural tourism patterns, as well as the challenges and opportunities arising from technological advancements and social changes.
• Digital Technologies in Rural Tourism: Investigations into the role of digital technologies such as online platforms, virtual experiences, big data, and social media in enhancing rural tourism experiences, promoting destinations, and supporting local economies.

Article types

Reviews

Reviews give a general overview of a particular field, providing the reader with an appreciation of the importance of the work, historical context, a summary of recent developments, and a starting point for delving further into the literature. Manuscripts should be divided into appropriate sections, with an extensive list of references. In addition to undergoing the same rigorous level of technical peer-review as Research papers, Review articles will be critiqued based on the general impact of the field being reviewed, the relevance of the field to current interest, preexisting reviews of the field, and acknowledgement of the contributing author as a significant figure in the field, although reviews based on the literature review for an advanced degree will be given consideration. Therefore, authors interested in submitting a Review Article are requested to contact the editors prior to submission, for inquiring the pertinence of the topic and discussing the angle. General formatting of text, illustrations, and references are the same as outlined for research papers. Review articles should not exceed 10,000 words.

Research papers

Original full-length research papers that have not been published previously. The following components are required for a complete manuscript: Cover letter, Title, Author(s), Author affiliation(s), Abstract, Keywords, Main text (including Introduction, Materials and Methods, Results and Discussion and Conclusion), References, Acknowledgements, Tables, Figure legend and Figures. Social and anthropological research may have different structure in the main text. Include page numbers on the document, beginning with the title page as number 1. Line numbering is also required. Please use the standard 12-point Times New Roman fonts. Research papers should not exceed 6000 words.

Short Communications or Rural Tourism Concepts

Short Communications or rural tourism concepts are short papers that present original and significant material for rapid dissemination. For example, a Short Communication may focus on a particular aspect of a rural tourism problem or a new finding that is expected to have a significant impact.Short Communications are limited to 3000 words and are not subdivided. The paper should contain an abstract, main body and references, and contain no more than 6 figures or tables, combined. The abstract is limited to 100 words.

Feature Article

Feature Articles offers authors the possibility of publishing in a different and original format consisting of an essay, an analytic, interpretative, or critical literary composition. This article type aims to give more depth to interesting and hot topics and new approaches in which the literature is still scarce. Written by an expert, these texts provide background information on a newsworthy topic as well as the author's personal slant or experience. Authors interested in submitting a Feature Article are requested to contact the editors prior to submission, for inquiring the pertinence of the topic and discussing the angle. General formatting of text, illustrations, and references are the same as outlined for research papers. Feature Articles should not exceed 10,000 words.

Commentaries and Opinion papers

The Commentaries or Opinion papers allows experts in the tourism and hospitality discipline to showcase their opinion. It is recommended to contact one of the editors to check the suitability of your topic. These types of articles generally have a limit of 750 words, and words and can be a response to an article previously published in the Journal.

Peer review

Open acces

JoRT is an open-access journal which means that all content is freely available without charge to the users. All open access papers are licensed and distributed under the terms of the Creative Commons Attribution 4.0 International License.

Ethic and policies

Ethic in publishing

Authors must follow ethical guidelines stated in JoRT Publishing Ethics Policy

Submission declaration

When authors submit an article to JoRT it is implied that:

• the work described has not been published previously except in the form of a preprint, an abstract, a published lecture, academic thesis or registered report. See our policy on multiple, redundant or concurrent publication.

• the article is not under consideration for publication elsewhere.

• the article's publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was carried out.

• if accepted, the article will not be published elsewhere in the same form, in English or in any other language, including electronically, without the written consent of the copyright-holder.

To verify compliance with our journal publishing policies, we may check your manuscript with our screening tools.

Authorship

Change to authorship

The editors of this journal generally will not consider changes to authorship once a manuscript has been submitted. It is important that authors carefully consider the authorship list and order of authors and provide a definitive author list at original submission.

The policy of this journal around authorship changes:

• All authors must be listed in the manuscript and their details entered into the submission system.

• Any addition, deletion or rearrangement of author names in the authorship list should only be made prior to acceptance, and only if approved by the journal editor.

• Requests to change authorship should be made by the corresponding author, who must provide the reason for the request to the journal editor with written confirmation from all authors, including any authors being added or removed, that they agree with the addition, removal or rearrangement.

• All requests to change authorship must be submitted using this form. Requests which do not comply with the instructions outlined in the form will not be considered.

• Only in exceptional circumstances will the journal editor consider the addition, deletion or rearrangement of authors post acceptance.

• Publication of the manuscript may be paused while a change in authorship request is being considered.

• Any authorship change requests approved by the journal editor will result in a corrigendum if the manuscript has already been published.

• Any unauthorised authorship changes may result in the rejection of the article, or retraction, if the article has already been published.

Declaration of interests

All authors must disclose any financial and personal relationships with other people or organizations that could inappropriately influence or bias their work. Examples of potential competing interests include:

• Employment

• Consultancies

• Stock ownership

• Honoraria

• Paid expert testimony

• Patent applications or registrations

• Grants or any other funding

The Declaration of Interests tool should always be completed.

Authors with no competing interests to declare should select the option, "I have nothing to declare".

The resulting Word document containing your declaration should be uploaded at the "attach/upload files" step in the submission process. It is important that the Word document is saved in the .doc/.docx file format. Author signatures are not required.

We advise you to read our policy on conflict of interest statements, funding source declarations, author agreements/declarations and permission notes.

Funding sources

Authors must disclose any funding sources who provided financial support for the conduct of the research and/or preparation of the article. The role of sponsors, if any, should be declared in relation to the study design, collection, analysis and interpretation of data, writing of the report and decision to submit the article for publication. If funding sources had no such involvement this should be stated in your submission.

List funding sources in this standard way to facilitate compliance to funder's requirements:

Funding: This work was supported by the National Institutes of Health [grant numbers xxxx, yyyy]; the Bill & Melinda Gates Foundation, Seattle, WA [grant number zzzz]; and the United States Institutes of Peace [grant number aaaa].

It is not necessary to include detailed descriptions on the program or type of grants, scholarships and awards. When funding is from a block grant or other resources available to a university, college, or other research institution, submit the name of the institute or organization that provided the funding.

If no funding has been provided for the research, it is recommended to include the following sentence:

This research did not receive any specific grant from funding agencies in the public, commercial, or not-for-profit sectors.

Preprint

Use of inclusive language

Reporting sex- and gender-based analyses

There is no single, universally agreed-upon set of guidelines for defining sex and gender. We offer the following guidance:

• Sex and gender-based analyses (SGBA) should be integrated into research design when research involves or pertains to humans, animals or eukaryotic cells and when sex and gender is relevant for the study outcome. This should be done in accordance with any requirements set by funders or sponsors and best practices within a field.

• Sex and/or gender dimensions of the research should be addressed within the article or declared as a limitation to the generalizability of the research.

• Definitions of sex and/or gender applied should be explicitly stated to enhance the precision, rigor and reproducibility of the research and to avoid ambiguity or conflation of terms and the constructs to which they refer.

We advise you to read the Sex and Gender Equity in Research (SAGER) guidelines and the SAGER checklist (PDF) on the EASE website, which offer systematic approaches to the use of sex and gender information in study design, data analysis, outcome reporting and research interpretation.

For further information we suggest reading the rationale behind and recommended use of the SAGER guidelines.

Definitions of sex and/or gender

We ask authors to define how sex and gender have been used in their research and publication. Some guidance:

• Sex generally refers to a set of biological attributes that are associated with physical and physiological features such as chromosomal genotype, hormonal levels, internal and external anatomy. A binary sex categorization (male/female) is usually designated at birth ("sex assigned at birth") and is in most cases based solely on the visible external anatomy of a newborn. In reality, sex categorizations include people who are intersex/have differences of sex development (DSD).

• Gender generally refers to socially constructed roles, behaviors and identities of women, men and gender-diverse people that occur in a historical and cultural context and may vary across societies and over time. Gender influences how people view themselves and each other, how they behave and interact and how power is distributed in society.

Image manipulations

We accept that authors sometimes need to adjust images for clarity but any manipulation of images for the purpose of deception or fraud will be seen as scientific ethical abuse and will be dealt with accordingly.

Authors must adhere to this journal’s policy for graphical images:

• No specific feature within an image may be enhanced, obscured, moved, removed or introduced.

• Adjustments of brightness, contrast, or color balance are acceptable if, and only as long as, they do not obscure or eliminate any information present in the original image.

• Nonlinear adjustments such as changes to gamma settings must be disclosed in the figure legend.

• We do not permit the use of generative AI or AI-assisted tools to create or alter images in submitted manuscripts. Please read our policy on the use of generative AI and AI-assisted tools in figures, images and artwork, which can be found in Elsevier’s GenAI Policies for Journals.

To verify compliance with the above, this journal may send your images to a third-party service who screen for image irregularities. Our editors may ask you to provide original data or images if any questions arise as a result of the screening. The final decision as to whether images are acceptable will be taken by our editors.

Authors are encouraged to carefully check all images before submission and to connect all the data in any figures to the original, unprocessed data.

Jurisdictional claims

Borneo Novelty Publishing respects the decisions taken by its authors as to how they choose to designate territories and identify their affiliations in their published content. Borneo Novelty Publishing’s policy is to take a neutral position with respect to territorial disputes or jurisdictional claims, including, but not limited to, maps and institutional affiliations. For journals that Borneo Novelty Publishing publishes on behalf of a third party owner, the owner may set its own policy on these issues.

• Maps: Readers should be able to locate any study areas shown within maps using common mapping platforms. Maps should only show the area actually studied and authors should not include a location map which displays a larger area than the bounding box of the study area. Authors should add a note clearly stating that "map lines delineate study areas and do not necessarily depict accepted national boundaries”.  During the review process, Borneo Novelty Publishing’s editors may request authors to change maps if these guidelines are not followed.

• Institutional affiliations: Authors should use either the full, standard title of their institution or the standard abbreviation of the institutional name so that the institutional name can be independently verified for research integrity purposes.

Studies in humans

Authors must follow ethical guidelines for studies carried out in humans.

Work which involves the use of human subjects should be carried out in accordance with the World Medical Association Declaration of Helsinki: Ethical principles for medical research involving human subjects.

Manuscripts should follow the International Committee of Medical Journal Editors (ICMJE) recommendations for the conduct, reporting, editing and publication of scholarly work in medical journals and aim to be representative of human populations in terms of sex, age and ethnicity. Sex and gender terms should be used correctly, as outlined by WHO (World Health Organization).

Manuscripts must include a statement that all procedures were performed in compliance with relevant laws and institutional guidelines and have been approved by the appropriate institutional committee(s). The statement should contain the date and reference number of the ethical approval(s) obtained.

Manuscripts must also include a statement that the privacy rights of human subjects have been observed and that informed consent was obtained for experimentation with human subjects.

This journal will not accept manuscripts that contain data derived from unethically sourced organs or tissue, including from executed prisoners or prisoners of conscience, consistent with recommendations by Global Rights Compliance on Mitigating Human Rights Risks in Transplantation Medicine. For all studies that use human organs or tissues, sufficient evidence must be provided that these were procured in line with WHO Guiding Principles on Human Cell, Tissue and Organ Transplantation. For clinical studies, a statement of informed consent having been obtained from a patient or their nominated representative, paired with ethical approval for the study from a suitable institution, as required by the policies of the journal, may be considered sufficient evidence, but the journal reserves the right to request additional evidence in cases where it feels this is not sufficient. The source of the organs or tissues used in clinical research must be transparent and traceable. If your manuscript describes organ transplantation you must additionally declare within the manuscript that:

• autonomous consent free from coercion was obtained from the donor(s) or their next of kin.

• organs and/or tissues were not sourced from executed prisoners or prisoners of conscience.

Plagiarism Policy

JoRT uses Turnitin to screen all submissions for plagiarism before publication. We advise you to read our Plagiarism Policy.

Writing and formatting

File format

Double anonymized peer review

This journal follows a double anonymized review process which means author identities are concealed from reviewers and vice versa.To facilitate the double anonymized review process, we ask that you provide your title page (including author details) and anonymized manuscript (excluding author details) separately in your submission.

The title page should include:

• Article title

• Author name(s)

• Affiliation(s)

• Acknowledgements

• Declaration of Interest statement

• Corresponding author address (full address is required)

• Corresponding author email address

The anonymized manuscript should contain the main body of your paper including:

• References

• Figures

• Tables

It is important that your anonymized manuscript does not contain any identifying information such as author names or affiliations.

Read more about peer review.

Title page

You are required to include the following details in the title page information:

• Article title. Article titles should be concise and informative. Please avoid abbreviations and formulae, where possible, unless they are established and widely understood, e.g., DNA).

• Author names. Provide the given name(s) and family name(s) of each author. The order of authors should match the order in the submission system. Carefully check that all names are accurately spelled. If needed, you can add your name between parentheses in your own script after the English transliteration.

• Affiliations. Add affiliation addresses, referring to where the work was carried out, below the author names. Indicate affiliations using a lower-case superscript letter immediately after the author's name and in front of the corresponding address. Ensure that you provide the full postal address of each affiliation, including the country name and, if available, the email address of each author.

• Corresponding author. Clearly indicate who will handle correspondence for your article at all stages of the refereeing and publication process and also post-publication. This responsibility includes answering any future queries about your results, data, methodology and materials. It is important that the email address and contact details of your corresponding author are kept up to date during the submission and publication process.

• Present/permanent address. If an author has moved since the work described in your article was carried out, or the author was visiting during that time, a "present address" (or "permanent address") can be indicated by a footnote to the author's name. The address where the author carried out the work must be retained as their main affiliation address. Use superscript Arabic numerals for such footnotes.

Abstract

You are required to provide a concise and factual abstract which does not exceed 250 words. The abstract should briefly state the purpose of your research, principal results and major conclusions. Some guidelines:

• Abstracts must be able to stand alone as abstracts are often presented separately from the article.

• Avoid references. If any are essential to include, ensure that you cite the author(s) and year(s).

• Avoid non-standard or uncommon abbreviations. If any are essential to include, ensure they are defined within your abstract at first mention.

Keywords

You are required to provide 1 to 6 keywords for indexing purposes. Keywords should be written in English. Please try to avoid keywords consisting of multiple words (using "and" or "of").

We recommend that you only use abbreviations in keywords if they are firmly established in the field.

Units, classifications codes and nomenclature

This journal requires you to use the international system of units (SI) which follows internationally accepted rules and conventions. If other units are mentioned within your article, you should provide the equivalent unit in SI.

Math formulae

• Submit math equations as editable text, not as images.

• Present simple formulae in line with normal text, where possible.

• Use the solidus (/) instead of a horizontal line for small fractional terms such as X/Y.

• Present variables in italics.

• Denote powers of e by exp.

• Display equations separately from your text, numbering them consecutively in the order they are referred to within your text.

Tables

Tables must be submitted as editable text, not as images. Some guidelines:

• Place tables next to the relevant text or on a separate page(s) at the end of your article.

• Cite all tables in the manuscript text.

• Number tables consecutively according to their appearance in the text.

• Please provide captions along with the tables.

• Place any table notes below the table body.

• Avoid vertical rules and shading within table cells.

We recommend that you use tables sparingly, ensuring that any data presented in tables is not duplicating results described elsewhere in the article.

Figures, images and artwork

Figures, images, artwork, diagrams and other graphical media must be supplied as separate files along with the manuscript. We recommend that you read our detailed artwork and media instructions. Some excerpts:

When submitting artwork:

• Cite all images in the manuscript text.

• Number images according to the sequence they appear within your article.

• Submit each image as a separate file using a logical naming convention for your files (for example, Figure_1, Figure_2 etc).

• Please provide captions for all figures, images, and artwork.

• Text graphics may be embedded in the text at the appropriate position. If you are working with LaTeX, text graphics may also be embedded in the file.

Artwork formats

When your artwork is finalized, "save as" or convert your electronic artwork to the formats listed below taking into account the given resolution requirements for line drawings, halftones, and line/halftone combinations:

• Vector drawings: Save as EPS or PDF files embedding the font or saving the text as "graphics."

• Color or grayscale photographs (halftones): Save as TIFF, JPG or PNG files using a minimum of 300 dpi (for single column: min. 1063 pixels, full page width: 2244 pixels).

• Bitmapped line drawings: Save as TIFF, JPG or PNG files using a minimum of 1000 dpi (for single column: min. 3543 pixels, full page width: 7480 pixels).

• Combinations bitmapped line/halftones (color or grayscale): Save as TIFF, JPG or PNG files using a minimum of 500 dpi (for single column: min. 1772 pixels, full page width: 3740 pixels).

Please do not submit:

• files that are too low in resolution (for example, files optimized for screen use such as GIF, BMP, PICT or WPG files).

• disproportionally large images compared to font size, as text may become unreadable.

Figure captions

All images must have a caption. A caption should consist of a brief title (not displayed on the figure itself) and a description of the image. We advise you to keep the amount of text in any image to a minimum, though any symbols and abbreviations used should be explained.

Provide captions in a separate file.

Color artwork

If you submit usable color figures with your accepted article, we will ensure that they appear in color online.

Please ensure that color images are accessible to all, including those with impaired color vision. Learn more about color and web accessibility.

Generative AI and Figures, images and artwork

Please read our policy on the use of generative AI and AI-assisted tools in figures, images and artwork, which can be found in Elsevier’s GenAI Policies for Journals. This policy states:

• We do not permit the use of Generative AI or AI-assisted tools to create or alter images in submitted manuscripts.

• The only exception is if the use of AI or AI-assisted tools is part of the research design or methods (for example, in the field of biomedical imaging). If this is the case, such use must be described in a reproducible manner in the methods section, including the name of the model or tool, version and extension numbers, and manufacturer.

• The use of generative AI or AI-assisted tools in the production of artwork such as for graphical abstracts is not permitted. The use of generative AI in the production of cover art may in some cases be allowed, if the author obtains prior permission from the journal editor and publisher, can demonstrate that all necessary rights have been cleared for the use of the relevant material, and ensures that there is correct content attribution.

Supplementary material

We encourage the use of supplementary materials such as applications, images and sound clips to enhance research. Some guidelines:

• Supplementary material should be accurate and relevant to the research.

• Cite all supplementary files in the manuscript text.

• Submit supplementary materials at the same time as your article. Be aware that all supplementary materials provided will appear online in the exact same file type as received. These files will not be formatted or typeset by the production team.

• Include a concise, descriptive caption for each supplementary file describing its content.

• Provide updated files if at any stage of the publication process you wish to make changes to submitted supplementary materials.

• Do not make annotations or corrections to a previous version of a supplementary file.

• Switch off the option to track changes in Microsoft Office files. If tracked changes are left on, they will appear in your published version.

Video

This journal accepts video material and animation sequences to support and enhance your scientific research. We encourage you to include links to video or animation files within articles. Some guidelines:

• When including video or animation file links within your article, refer to the video or animation content by adding a note in your text where the file should be placed.

• Clearly label files ensuring the given file name is directly related to the file content.

• Provide files in one of our recommended file formats. Files should be within our preferred maximum file size of 150 MB per file, 1 GB in total.

• Provide "stills" for each of your files. These will be used as standard icons to personalize the link to your video data. You can choose any frame from your video or animation or make a separate image.

• Provide text (for both the electronic and the print version) to be placed in the portions of your article that refer to the video content. This is essential text, as video and animation files cannot be embedded in the print version of the journal.

We publish all video and animation files supplied in the electronic version of your article.

For more detailed instructions, we recommend that you read our guidelines on submitting video content to be included in the body of an article.

Research data

Data statement

To foster transparency, you are encouraged to state the availability of any data at submission.

Ensuring data is available may be a requirement of your funding body or institution. If your data is unavailable to access or unsuitable to post, you can state the reason why (e.g., your research data includes sensitive or confidential information such as patient data) during the submission process. This statement will appear with your published article on ScienceDirect.

Read more about the importance and benefits of providing a data statement.

Data linking

Linking to the data underlying your work increases your exposure and may lead to new collaborations. It also provides readers with a better understanding of the described research.

If your research data has been made available in a data repository there are a number of ways your article can be linked directly to the dataset:

• Provide a link to your dataset when prompted during the online submission process.

• For some data repositories, a repository banner will automatically appear next to your published article on ScienceDirect.

• You can also link relevant data or entities within the text of your article through the use of identifiers. Use the following format: Database: 12345 (e.g. TAIR: AT1G01020; CCDC: 734053; PDB: 1XFN).

Learn more about linking research data and research articles in ScienceDirect.

Research element

This journal enables the publication of research objects (e.g. data, methods, protocols, software and hardware) related to original research in Elsevier's Research Elements journals.

Research Elements are peer-reviewed, open access journals which make research objects findable, accessible and reusable. By providing detailed descriptions of objects and their application with links to the original research article, your research objects can be placed into context within your article.

You will be alerted during submission to the opportunity to submit a manuscript to one of the Research Elements journals. Your Research Elements article can be prepared by you, or by one of your collaborators.

Article structure

References

Submitting your manuscript

Submit online

Our online submission system guides you through the process steps of entering your manuscript details and uploading your files. 

Editable files (e.g., Word, LaTeX) are required to typeset your article for final publication. All correspondence, including notification of the editor's decision and requests for revision, is sent by email.

Please follow this link to submit your paper.

After receiving a final decision

Article Transfer Service

If your manuscript is more suitable for an alternative Elsevier journal, you may receive an email asking you to consider transferring your manuscript via the Elsevier Article Transfer Service.

The recommendation could come from the journal editor, a dedicated in-house scientific managing editor, a tool-assisted recommendation or a combination.

If you agree with the recommendation, your manuscript will be transferred and independently reviewed by the editors of the new journal. You will have the opportunity to make revisions, if necessary, before the submission is complete at the destination journal.

Publishing agreement

Authors will be asked to complete a publishing agreement after acceptance. The corresponding author will receive a link to the online agreement by email. We advise you to read Elsevier's policies related to copyright to learn more about our copyright policies and your, and your employer’s/institution’s, additional rights for subscription and gold open access articles.

License options

Authors will be offered open access user license options which will determine how you, and third parties, can reuse your gold open access article. We advise that you review these options and any funding body license requirements before selecting a license option.

Open acces

We refer you to our open access information page to learn about open access options for this journal.

Permission for copyrighted works

If excerpts from other copyrighted works are included in your article, you must obtain written permission from the copyright owners and credit the source(s) within your article using Elsevier’s permission request and license form (Word).

Proofs correction

To ensure a fast publication process we will ask you to provide proofs corrections within two days.

Corresponding authors will be sent an email which includes a link to our online proofing system, allowing annotation and correction of proofs online. The environment is similar to Word. You can edit text, comment on figures and tables and answer questions raised by our copy editor. Our web-based proofing service ensures a faster and less error-prone process.

You can choose to annotate and upload your edits on the PDF version of your article, if preferred. We will provide you with proofing instructions and available alternative proofing methods in our email.

The purpose of the proof is to check the typesetting, editing, completeness and correctness of your article text, tables and figures. Significant changes to your article at the proofing stage will only be considered with approval of the journal editor.

Share link

A customized Share Link, providing 50 days free access to the final published version of your article on ScienceDirect, will be sent by email to the corresponding author. The Share Link can be used to share your article on any communication channel, such as by email or on social media.

For an extra charge, you will be provided with the option to order paper offprints. A link to an offprint order form will be sent by email when your article is accepted for publication.

A Share Link will not be provided if your article is published gold open access. The final published version of your gold open access article will be openly available on ScienceDirect and can be shared through the article DOI link.

Responsible sharing

We encourage you to share and promote your article to give additional visibility to your work, enabling your paper to contribute to scientific progress and foster the exchange of scientific developments within your field. Read more about how to responsibly share and promote your article.

Resources for authors

Language and editing services

We recommend that you write in American or British English but not a combination of both.

If you feel the English language in your manuscript requires editing to eliminate possible grammatical or spelling errors and to conform to correct scientific English, you may wish to use the English Language Editing service provided by Elsevier’s Author Services.

Getting help and support

Author support

We recommend that you visit our Journal Article Publishing Support Center if you have questions about the editorial process or require technical support for your submission. Some popular FAQs:

• How can I track the status of my submitted article?

• When will my article be published?

Principal contact

Feel free to contact the JoRT Editor for further assistance.